• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and double glazed window repairs near me easy to maintain. In contrast to aluminium and timber, they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and may even be fatal. It is crucial to take the time to ensure that you're doing all you can to ensure that your windows are in good repair.

For single pane windows it is relatively easy to replace windows, and the new one will generally fit within the old frame very easily. If you have double Glazed window repairs near me-paned windows that are held together by internal beading, it will be difficult to remove and replace the old panes. In this instance, you will need to locate some plastic spacers to assist the new pane to fit correctly into the window frame.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor and could be trampled under.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and fix the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the gap between the window and the door is significant, you may prefer a security screen that also includes windows. This will give you the best of both.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. However, over time, they can suffer from a variety of issues like sliding. A sagging uPVC window can cause issues with light, draughts, and even security. It's crucial to act when you notice your uPVC windows are falling down.

To repair a window that is sagging, you can try repositioning the hinges. You'll first need to open the windows so you can reach the frame. With a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they stay in place.

If you aren't able to move the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause them to lose tightness. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are watertight and draught-proof.

UPVC handles can also loosen. This is usually due to screws that have become undone over time, but it could be due to the handle mechanism getting worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close your window and do an experiment to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it isn't then you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

It is important to take action if you wake up every morning to find mouldy walls and floors that are wet. The leaks of water from windows do can not only cause destruction of your home's structure but also hamper your efforts to control the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame has been damaged or missing.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the problem the old caulking might need to be removed before a fresh layer can be applied. When it is time to uPVC repair, you should avoid 'over-caulking'. This will only make your window more difficult to clean and decrease its energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or if it opens in a breeze. Any competent DIYer can replace these in a matter of minutes.

Like any mechanical component hinges will be damaged over time. Changing a window hinge is essentially a simple procedure, but it is simpler if you have someone to help you hold the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused by opening the window incorrectly or a faulty installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are happy to provide assistance.

Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the chance of windows getting stuck and stop corrosion. Ideally, you should do this once a year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges can also become disaligned as a result of wear, which can cause a gap where the sash meets frame. If they're beyond repair, it could be required to realign them. Secondly the interlock, this is located on the hinge of the window, may also be misaligned, and again it is possible to just give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

These seals can wear down or double Glazed window repairs near me be damaged over time, allowing air to escape. Installing high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the upvc window with low-emissivity glass window repair, this will help in regulating indoor temperatures and will reduce the possibility of draughts.

Lastly, one of the most effective ways to cut down on draughts is by using a draught excluder, these are usually fabric tubes which are filled with a sort of filler and can be put on top of your windowsill. These will help to block out cold air and keep your home warm and cosy!

With a little maintenance and repair your windows made of upvc will provide a great level of security and insulation for your home. It is important to remember that all windows eventually wear out and it could be more cost-effective to simply replace them instead of fixing them. So, if you are experiencing problems with your upvc windows, it is best to seek professional assistance as soon as you can.